Fluoride Saturators: Specifications Page

ENGINEERING SPECIFICATIONS

Saturator shall be of 55-gallon capacity of the up-flow design and constructed of all thermoplastic materials.
Design shall include 6 distribution laterals for best disbursing of incoming water through the NaF crystals.
Cover assembly shall be flat for easy mounting of two chemical-feed pumps and should be equipped with an internal baffle to protect the float switch during addition of sodium fluoride (NaF) crystals.
Cover assembly must have 50% of its area moveable for easy refilling with NaF and also for easier maintenance.
Saturator must be equipped with a syphon breaker to prevent back-syphoning into the water source.
Pump pick-up tubes shall be removable from the outside for easy cleaning.

PRODUCT SPECIFICATIONS

Incoming Water Flow Rate:	2 GPM Maximum
Maximum Solution Feed Rate:	1 GPM Water
Water Quality Requirements:	< 2 Grains Hardness (Water Softener required for greater hardness)
Electrical Requirements:	None
Incoming Water Connection:	6' of tubing with ½ NPT male fitting provided for supply connection